Build with AI
From a photo, plan or sketch
Instead of describing, send an image. The AI reads the dimensions, shows what it understood so you can check it, and builds only after your OK.
- 1Imagephoto, plan, sketch or PDF
- 2Readingdimensions, profiles and loads
- 3Your checkaccept, correct or discard
- 4Buildjust like a text request
What you can send
- Floor plan, section, elevation, detail, hand sketch or a photo of the structure.
- JPG, PNG, WebP or PDF. Each page of the PDF goes in as one image.
- Up to 4 images per request. A password-protected PDF does not go in: remove the password or send the page as an image.
How to send
- The attach button on the AI card.
- Paste the image straight into the text field.
- On a phone, the camera or the gallery.
Before sending: cover the data
Cover client data paints black bars over what should not leave your computer, such as the client’s name, tax ID and address. The image is not stored, and the location and camera information of the file is removed before sending.
The reading card
Before building, the AI shows what it read. Each dimension says where it came from.
Dimensions
- Span 12 mdimension
- Length 30 mdimension
- Eave height 6 mfrom scale
- Frame spacing 6 mcalculated
- Ridge height 0.6 mestimated
Profiles
- Not indicated in the drawing
I also saw
- Gate on the front facade
The AI will ask
- Profile of the columns and beams
Something wrong? Type the correction below.
- dimension
- written on the drawing
- from scale
- measured with the scale of the drawing
- calculated
- derived from other dimensions
- estimated
- an assumption of the AI; check it before building
If something is wrong, write the correction in the field. What you write counts more than the reading.
If the image has no structure, or the dimensions are not legible, the AI says so and asks for a sharper photo or for the dimensions in writing.
The reading uses quota like any request.