Prints
Prints is the tab where the model becomes paper. You compose sheets: drop views of the structure at a chosen scale, add connection details, tables of quantities and calculation reports, write your notes, fill the title block, and take the whole thing out as PDF or DXF. Everything on a sheet points back at the model, so a sheet is a layout, not a copy.
Paper, and how much fits on it
Sheets are landscape, in the five ISO A sizes. The size is a property of the sheet and can be changed after the fact: blocks keep their position in millimetres, so going from A3 up to A1 gives you room rather than rescaling what is already there.
| Size | Dimensions | Typical use |
|---|---|---|
| A4 | 297 × 210 mm | A single detail, or a one-page report. |
| A3 | 420 × 297 mm | Details and small elevations. The size most offices print in house. |
| A2 | 594 × 420 mm | A frame with its details alongside. |
| A1 | 841 × 594 mm | General arrangement drawings. |
| A0 | 1189 × 841 mm | The whole building on one sheet. |
Scales come from a standard list, from 1:25 up to 1:250, chosen per view. Two views of the same thing at two scales on one sheet is normal and expected: the plan at 1:100 and the corner at 1:25.
The same view, drawn five ways
A view placed on a sheet carries a render mode, and the mode is what decides whether the block reads as a drawing or as a picture. Changing it does not change the view, only how that placement is drawn.
Placing a view processes it: the 3D is turned into 2D lines once and the lines are saved with the sheet, so opening the drawing again does not rebuild the geometry. The shaded perspective is the exception, because it is an image rather than a drawing. Measured on a twelve-frame shed, the shaded figure is 11,385 faces and 2.1 MB, while the line drawing of the same view is 1,942 strokes. Saving the first one per placement would inflate the project; so it stays live.
What else goes on a sheet
Connection details
Any detailed node can be dropped on paper as a dimensioned block, at its own scale.
Summary table
Quantities taken from the model: profiles, lengths, weights. It updates with the model, it is not typed.
Report blocks
Support reactions, load combinations, wind and connections, each as a table block you place on the sheet.
Text boxes
Your own notes, in your own words. Titles picked from the standard list translate with the interface; anything you type stays exactly as you wrote it, in every language.
Automatic tags
Profile and dimension labels generated from the model. Each one can be rewritten or hidden, and rewriting one by name changes every label with that name on the sheet, including the ones a new bar will create later.
The title block
Fixed at the corner, filled once, applied to every sheet in the project.
Where to go next
The title block
Two layouts, the fields they carry, and why the drawing and the DXF always agree.
Standard details
Seventeen ready-made details to drop on a sheet, and what they are: drawing, not calculation.
The report document
Eight modules that assemble the calculation memo, from cover to appendix.
DXF export
The layers that come out, and what opens the file on the other side.
Compose a sheet, place a detail and export the DXF, in the browser. Free.
افتح المحرر ثلاثي الأبعاد