I 950x255x15x28 Tecnometal · Weight & Dimensions
Tecnometal, welded sections (Spain) · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 950x255x15x28 Tecnometal in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 950x255x15x28 steel profile weighs 217.4 kg/m (146.07 lb/ft), has a depth of 950 mm (37.40 in), flange width 255 mm (10.04 in). Cross-sectional area: 27,690 mm². Moment of inertia Ix = 392,887.907 cm⁴, Iy = 7,763.119 cm⁴.
Dimensions
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 950 mm | 37.40 in |
| Width (b) | 255 mm | 10.04 in |
| Web thickness (tw) | 15 mm | 0.59 in |
| Flange thickness (tf) | 28 mm | 1.10 in |
| Weight | 217.4 kg/m | 146.07 lb/ft |
Section Properties
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 27,690 mm² | 42.919 in² |
| Moment of inertia (Ix) | 392,887.91 cm⁴ | 9439.13 in⁴ |
| Moment of inertia (Iy) | 7,763.12 cm⁴ | 186.51 in⁴ |
| Elastic section modulus (Sx) | 8,271.32 cm³ | 504.749 in³ |
| Elastic section modulus (Sy) | 608.87 cm³ | 37.156 in³ |
| Plastic section modulus (Zx) | 9,580.22 cm³ | 584.623 in³ |
| Plastic section modulus (Zy) | 960.64 cm³ | 58.622 in³ |
| Radius of gyration (rx) | 37.67 cm | 14.830 in |
| Radius of gyration (ry) | 5.29 cm | 2.085 in |
Beam Calculator— I 950x255x15x28
Results — I 950x255x15x28
15.0 kN·m
15.0 kN
0.02 mm
L/279387
