Tecnometal, welded sections (Spain) · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 1000x260x15x30 Tecnometal in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 1000x260x15x30 steel profile weighs 233.2 kg/m (156.68 lb/ft), has a depth of 1000 mm (39.37 in), flange width 260 mm (10.24 in). Cross-sectional area: 29,700 mm². Moment of inertia Ix = 470,891 cm⁴, Iy = 8,814.438 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 1000 mm | 39.37 in |
| Width (b) | 260 mm | 10.24 in |
| Web thickness (tw) | 15 mm | 0.59 in |
| Flange thickness (tf) | 30 mm | 1.18 in |
| Weight | 233.2 kg/m | 156.68 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 29,700 mm² | 46.035 in² |
| Moment of inertia (Ix) | 470,891 cm⁴ | 11313.16 in⁴ |
| Moment of inertia (Iy) | 8,814.44 cm⁴ | 211.77 in⁴ |
| Elastic section modulus (Sx) | 9,417.82 cm³ | 574.713 in³ |
| Elastic section modulus (Sy) | 678.03 cm³ | 41.376 in³ |
| Plastic section modulus (Zx) | 10,879.5 cm³ | 663.911 in³ |
| Plastic section modulus (Zy) | 1,066.88 cm³ | 65.105 in³ |
| Radius of gyration (rx) | 39.82 cm | 15.676 in |
| Radius of gyration (ry) | 5.45 cm | 2.145 in |
15.0 kN·m
15.0 kN
0.02 mm
L/334856