I 900x250x15x27 Tecnometal · Weight & Dimensions
Tecnometal, welded sections (Spain) · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 900x250x15x27 Tecnometal in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 900x250x15x27 steel profile weighs 205.6 kg/m (138.16 lb/ft), has a depth of 900 mm (35.43 in), flange width 250 mm (9.84 in). Cross-sectional area: 26,190 mm². Moment of inertia Ix = 332,987.517 cm⁴, Iy = 7,055.044 cm⁴.
Dimensions
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 900 mm | 35.43 in |
| Width (b) | 250 mm | 9.84 in |
| Web thickness (tw) | 15 mm | 0.59 in |
| Flange thickness (tf) | 27 mm | 1.06 in |
| Weight | 205.6 kg/m | 138.16 lb/ft |
Section Properties
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 26,190 mm² | 40.594 in² |
| Moment of inertia (Ix) | 332,987.52 cm⁴ | 8000.03 in⁴ |
| Moment of inertia (Iy) | 7,055.04 cm⁴ | 169.50 in⁴ |
| Elastic section modulus (Sx) | 7,399.72 cm³ | 451.561 in³ |
| Elastic section modulus (Sy) | 564.4 cm³ | 34.442 in³ |
| Plastic section modulus (Zx) | 8,576.69 cm³ | 523.384 in³ |
| Plastic section modulus (Zy) | 891.34 cm³ | 54.393 in³ |
| Radius of gyration (rx) | 35.66 cm | 14.038 in |
| Radius of gyration (ry) | 5.19 cm | 2.043 in |
Beam Calculator— I 900x250x15x27
Results — I 900x250x15x27
15.0 kN·m
15.0 kN
0.03 mm
L/236791
