Tecnometal, welded sections (Spain) · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 850x245x14x25 Tecnometal in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 850x245x14x25 steel profile weighs 184.1 kg/m (123.70 lb/ft), has a depth of 850 mm (33.46 in), flange width 245 mm (9.65 in). Cross-sectional area: 23,450 mm². Moment of inertia Ix = 268,238.542 cm⁴, Iy = 6,145.845 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 850 mm | 33.46 in |
| Width (b) | 245 mm | 9.65 in |
| Web thickness (tw) | 14 mm | 0.55 in |
| Flange thickness (tf) | 25 mm | 0.98 in |
| Weight | 184.1 kg/m | 123.70 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 23,450 mm² | 36.347 in² |
| Moment of inertia (Ix) | 268,238.54 cm⁴ | 6444.43 in⁴ |
| Moment of inertia (Iy) | 6,145.85 cm⁴ | 147.65 in⁴ |
| Elastic section modulus (Sx) | 6,311.5 cm³ | 385.153 in³ |
| Elastic section modulus (Sy) | 501.7 cm³ | 30.616 in³ |
| Plastic section modulus (Zx) | 7,293.13 cm³ | 445.056 in³ |
| Plastic section modulus (Zy) | 789.51 cm³ | 48.179 in³ |
| Radius of gyration (rx) | 33.82 cm | 13.315 in |
| Radius of gyration (ry) | 5.12 cm | 2.016 in |
15.0 kN·m
15.0 kN
0.03 mm
L/190747