Cintac, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 200x150x5x8 Cintac in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 200x150x5x8 steel profile weighs 26.1 kg/m (17.51 lb/ft), has a depth of 200 mm (7.87 in), flange width 150 mm (5.91 in). Cross-sectional area: 3,320 mm². Moment of inertia Ix = 2,472.683 cm⁴, Iy = 450.192 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 200 mm | 7.87 in |
| Width (b) | 150 mm | 5.91 in |
| Web thickness (tw) | 5 mm | 0.20 in |
| Flange thickness (tf) | 8 mm | 0.31 in |
| Weight | 26.1 kg/m | 17.51 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 3,320 mm² | 5.146 in² |
| Moment of inertia (Ix) | 2,472.68 cm⁴ | 59.41 in⁴ |
| Moment of inertia (Iy) | 450.19 cm⁴ | 10.82 in⁴ |
| Elastic section modulus (Sx) | 247.27 cm³ | 15.089 in³ |
| Elastic section modulus (Sy) | 60.03 cm³ | 3.663 in³ |
| Plastic section modulus (Zx) | 272.72 cm³ | 16.642 in³ |
| Plastic section modulus (Zy) | 91.15 cm³ | 5.562 in³ |
| Radius of gyration (rx) | 8.63 cm | 3.398 in |
| Radius of gyration (ry) | 3.68 cm | 1.450 in |
15.0 kN·m
15.0 kN
3.41 mm
L/1758