Cintac, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 200x150x5x10 Cintac in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 200x150x5x10 steel profile weighs 30.6 kg/m (20.58 lb/ft), has a depth of 200 mm (7.87 in), flange width 150 mm (5.91 in). Cross-sectional area: 3,900 mm². Moment of inertia Ix = 2,953 cm⁴, Iy = 562.688 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 200 mm | 7.87 in |
| Width (b) | 150 mm | 5.91 in |
| Web thickness (tw) | 5 mm | 0.20 in |
| Flange thickness (tf) | 10 mm | 0.39 in |
| Weight | 30.6 kg/m | 20.58 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 3,900 mm² | 6.045 in² |
| Moment of inertia (Ix) | 2,953 cm⁴ | 70.95 in⁴ |
| Moment of inertia (Iy) | 562.69 cm⁴ | 13.52 in⁴ |
| Elastic section modulus (Sx) | 295.3 cm³ | 18.020 in³ |
| Elastic section modulus (Sy) | 75.03 cm³ | 4.578 in³ |
| Plastic section modulus (Zx) | 325.5 cm³ | 19.863 in³ |
| Plastic section modulus (Zy) | 113.63 cm³ | 6.934 in³ |
| Radius of gyration (rx) | 8.7 cm | 3.426 in |
| Radius of gyration (ry) | 3.8 cm | 1.495 in |
15.0 kN·m
15.0 kN
2.86 mm
L/2100