Cintac, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 200x150x4x6 Cintac in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 200x150x4x6 steel profile weighs 20.0 kg/m (13.45 lb/ft), has a depth of 200 mm (7.87 in), flange width 150 mm (5.91 in). Cross-sectional area: 2,552 mm². Moment of inertia Ix = 1,915.649 cm⁴, Iy = 337.6 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 200 mm | 7.87 in |
| Width (b) | 150 mm | 5.91 in |
| Web thickness (tw) | 4 mm | 0.16 in |
| Flange thickness (tf) | 6 mm | 0.24 in |
| Weight | 20.0 kg/m | 13.45 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 2,552 mm² | 3.956 in² |
| Moment of inertia (Ix) | 1,915.65 cm⁴ | 46.02 in⁴ |
| Moment of inertia (Iy) | 337.6 cm⁴ | 8.11 in⁴ |
| Elastic section modulus (Sx) | 191.56 cm³ | 11.690 in³ |
| Elastic section modulus (Sy) | 45.01 cm³ | 2.747 in³ |
| Plastic section modulus (Zx) | 209.94 cm³ | 12.812 in³ |
| Plastic section modulus (Zy) | 68.25 cm³ | 4.165 in³ |
| Radius of gyration (rx) | 8.66 cm | 3.411 in |
| Radius of gyration (ry) | 3.64 cm | 1.432 in |
15.0 kN·m
15.0 kN
4.40 mm
L/1362