Steel Section Catalog
W410x67
AISC — Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
The W410x67 steel profile weighs 67.0 kg/m (45.02 lb/ft), has a depth of 410 mm (16.14 in), flange width 179 mm (7.05 in). Cross-sectional area: 8,509.8 mm². Moment of inertia Ix = 24,240.73 cm⁴, Iy = 1,378.65 cm⁴.
Cross-section (not to scale)
Dimensions
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 410 mm | 16.14 in |
| Width (b) | 179 mm | 7.05 in |
| Web thickness (tw) | 8.8 mm | 0.35 in |
| Flange thickness (tf) | 14.4 mm | 0.57 in |
| Fillet radius (r) | 10.2 mm | 0.40 in |
| Weight | 67.0 kg/m | 45.02 lb/ft |
Section Properties
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 8,509.8 mm² | 13.190 in² |
| Moment of inertia (Ix) | 24,240.73 cm⁴ | 582.38 in⁴ |
| Moment of inertia (Iy) | 1,378.65 cm⁴ | 33.12 in⁴ |
| Elastic section modulus (Sx) | 1,182.47 cm³ | 72.159 in³ |
| Elastic section modulus (Sy) | 154.04 cm³ | 9.400 in³ |
| Plastic section modulus (Zx) | 1,339.39 cm³ | 81.735 in³ |
| Plastic section modulus (Zy) | 238.08 cm³ | 14.529 in³ |
| Radius of gyration (rx) | 16.88 cm | 6.646 in |
| Radius of gyration (ry) | 4.03 cm | 1.587 in |
Beam Calculator— W410x67
3D preview unavailable
Your device does not support WebGL. The 2D diagram below is still fully functional.
mfixed @ 0mfixed @ 6m→kN/m
Results — W410x67
Mmax
15.0 kN·m
Vmax
15.0 kN
δmax
0.35 mm
L/17238
R115.0 kN| 15.0 kN·mR215.0 kN| -15.0 kN·m
Standard:
