Steel Section Catalog
W410x60
AISC — Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
The W410x60 steel profile weighs 60.0 kg/m (40.32 lb/ft), has a depth of 407 mm (16.02 in), flange width 178 mm (7.01 in). Cross-sectional area: 7,493.6 mm². Moment of inertia Ix = 21,268.68 cm⁴, Iy = 1,204.6 cm⁴.
Cross-section (not to scale)
Dimensions
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 407 mm | 16.02 in |
| Width (b) | 178 mm | 7.01 in |
| Web thickness (tw) | 7.7 mm | 0.30 in |
| Flange thickness (tf) | 12.8 mm | 0.50 in |
| Fillet radius (r) | 10.2 mm | 0.40 in |
| Weight | 60.0 kg/m | 40.32 lb/ft |
Section Properties
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 7,493.6 mm² | 11.615 in² |
| Moment of inertia (Ix) | 21,268.68 cm⁴ | 510.98 in⁴ |
| Moment of inertia (Iy) | 1,204.6 cm⁴ | 28.94 in⁴ |
| Elastic section modulus (Sx) | 1,045.14 cm³ | 63.779 in³ |
| Elastic section modulus (Sy) | 135.35 cm³ | 8.260 in³ |
| Plastic section modulus (Zx) | 1,178.17 cm³ | 71.897 in³ |
| Plastic section modulus (Zy) | 208.43 cm³ | 12.719 in³ |
| Radius of gyration (rx) | 16.85 cm | 6.634 in |
| Radius of gyration (ry) | 4.01 cm | 1.579 in |
Beam Calculator— W410x60
3D preview unavailable
Your device does not support WebGL. The 2D diagram below is still fully functional.
mfixed @ 0mfixed @ 6m→kN/m
Results — W410x60
Mmax
15.0 kN·m
Vmax
15.0 kN
δmax
0.40 mm
L/15124
R115.0 kN| 15.0 kN·mR215.0 kN| -15.0 kN·m
Standard:
