Steel Section Catalog
W410x54
AISC — Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
The W410x54 steel profile weighs 54.0 kg/m (36.29 lb/ft), has a depth of 403 mm (15.87 in), flange width 177 mm (6.97 in). Cross-sectional area: 6,717.6 mm². Moment of inertia Ix = 18,296.67 cm⁴, Iy = 1,008.72 cm⁴.
Cross-section (not to scale)
Dimensions
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 403 mm | 15.87 in |
| Width (b) | 177 mm | 6.97 in |
| Web thickness (tw) | 7.5 mm | 0.30 in |
| Flange thickness (tf) | 10.9 mm | 0.43 in |
| Fillet radius (r) | 10.2 mm | 0.40 in |
| Weight | 54.0 kg/m | 36.29 lb/ft |
Section Properties
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 6,717.6 mm² | 10.412 in² |
| Moment of inertia (Ix) | 18,296.67 cm⁴ | 439.58 in⁴ |
| Moment of inertia (Iy) | 1,008.72 cm⁴ | 24.23 in⁴ |
| Elastic section modulus (Sx) | 908.02 cm³ | 55.411 in³ |
| Elastic section modulus (Sy) | 113.98 cm³ | 6.956 in³ |
| Plastic section modulus (Zx) | 1,028.94 cm³ | 62.790 in³ |
| Plastic section modulus (Zy) | 176.1 cm³ | 10.746 in³ |
| Radius of gyration (rx) | 16.5 cm | 6.496 in |
| Radius of gyration (ry) | 3.88 cm | 1.528 in |
Beam Calculator— W410x54
3D preview unavailable
Your device does not support WebGL. The 2D diagram below is still fully functional.
mfixed @ 0mfixed @ 6m→kN/m
Results — W410x54
Mmax
15.0 kN·m
Vmax
15.0 kN
δmax
0.46 mm
L/13011
R115.0 kN| 15.0 kN·mR215.0 kN| -15.0 kN·m
Standard:
