Tecnometal, welded sections (Spain) · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 750x235x14x22 Tecnometal in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 750x235x14x22 steel profile weighs 158.8 kg/m (106.69 lb/ft), has a depth of 750 mm (29.53 in), flange width 235 mm (9.25 in). Cross-sectional area: 20,224 mm². Moment of inertia Ix = 178,097.081 cm⁴, Iy = 4,774.698 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 750 mm | 29.53 in |
| Width (b) | 235 mm | 9.25 in |
| Web thickness (tw) | 14 mm | 0.55 in |
| Flange thickness (tf) | 22 mm | 0.87 in |
| Weight | 158.8 kg/m | 106.69 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 20,224 mm² | 31.347 in² |
| Moment of inertia (Ix) | 178,097.08 cm⁴ | 4278.78 in⁴ |
| Moment of inertia (Iy) | 4,774.7 cm⁴ | 114.71 in⁴ |
| Elastic section modulus (Sx) | 4,749.26 cm³ | 289.819 in³ |
| Elastic section modulus (Sy) | 406.36 cm³ | 24.798 in³ |
| Plastic section modulus (Zx) | 5,508.29 cm³ | 336.138 in³ |
| Plastic section modulus (Zy) | 642.07 cm³ | 39.182 in³ |
| Radius of gyration (rx) | 29.68 cm | 11.683 in |
| Radius of gyration (ry) | 4.86 cm | 1.913 in |
15.0 kN·m
15.0 kN
0.05 mm
L/126647