Tecnometal, welded sections (Spain) · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 700x230x12x22 Tecnometal in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 700x230x12x22 steel profile weighs 141.2 kg/m (94.91 lb/ft), has a depth of 700 mm (27.56 in), flange width 230 mm (9.06 in). Cross-sectional area: 17,992 mm². Moment of inertia Ix = 144,570.911 cm⁴, Iy = 4,470.68 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 700 mm | 27.56 in |
| Width (b) | 230 mm | 9.06 in |
| Web thickness (tw) | 12 mm | 0.47 in |
| Flange thickness (tf) | 22 mm | 0.87 in |
| Weight | 141.2 kg/m | 94.91 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 17,992 mm² | 27.888 in² |
| Moment of inertia (Ix) | 144,570.91 cm⁴ | 3473.32 in⁴ |
| Moment of inertia (Iy) | 4,470.68 cm⁴ | 107.41 in⁴ |
| Elastic section modulus (Sx) | 4,130.6 cm³ | 252.066 in³ |
| Elastic section modulus (Sy) | 388.75 cm³ | 23.723 in³ |
| Plastic section modulus (Zx) | 4,721.69 cm³ | 288.136 in³ |
| Plastic section modulus (Zy) | 605.52 cm³ | 36.951 in³ |
| Radius of gyration (rx) | 28.35 cm | 11.160 in |
| Radius of gyration (ry) | 4.98 cm | 1.963 in |
15.0 kN·m
15.0 kN
0.06 mm
L/102806