I 600x600x20x31 Tecnometal · Weight & Dimensions
Tecnometal, welded sections (Spain) · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 600x600x20x31 Tecnometal in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 600x600x20x31 steel profile weighs 376.5 kg/m (253.00 lb/ft), has a depth of 600 mm (23.62 in), flange width 600 mm (23.62 in). Cross-sectional area: 47,960 mm². Moment of inertia Ix = 327,349.119 cm⁴, Iy = 111,635.867 cm⁴.
Dimensions
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 600 mm | 23.62 in |
| Width (b) | 600 mm | 23.62 in |
| Web thickness (tw) | 20 mm | 0.79 in |
| Flange thickness (tf) | 31 mm | 1.22 in |
| Weight | 376.5 kg/m | 253.00 lb/ft |
Section Properties
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 47,960 mm² | 74.338 in² |
| Moment of inertia (Ix) | 327,349.12 cm⁴ | 7864.56 in⁴ |
| Moment of inertia (Iy) | 111,635.87 cm⁴ | 2682.05 in⁴ |
| Elastic section modulus (Sx) | 10,911.64 cm³ | 665.872 in³ |
| Elastic section modulus (Sy) | 3,721.2 cm³ | 227.082 in³ |
| Plastic section modulus (Zx) | 12,030.62 cm³ | 734.157 in³ |
| Plastic section modulus (Zy) | 5,633.8 cm³ | 343.797 in³ |
| Radius of gyration (rx) | 26.13 cm | 10.286 in |
| Radius of gyration (ry) | 15.26 cm | 6.007 in |
Beam Calculator— I 600x600x20x31
Results — I 600x600x20x31
15.0 kN·m
15.0 kN
0.03 mm
L/232782
