I 500x500x14x25 Tecnometal · Weight & Dimensions
Tecnometal, welded sections (Spain) · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 500x500x14x25 Tecnometal in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 500x500x14x25 steel profile weighs 245.7 kg/m (165.12 lb/ft), has a depth of 500 mm (19.69 in), flange width 500 mm (19.69 in). Cross-sectional area: 31,300 mm². Moment of inertia Ix = 151,777.083 cm⁴, Iy = 52,093.623 cm⁴.
Dimensions
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 500 mm | 19.69 in |
| Width (b) | 500 mm | 19.69 in |
| Web thickness (tw) | 14 mm | 0.55 in |
| Flange thickness (tf) | 25 mm | 0.98 in |
| Weight | 245.7 kg/m | 165.12 lb/ft |
Section Properties
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 31,300 mm² | 48.515 in² |
| Moment of inertia (Ix) | 151,777.08 cm⁴ | 3646.44 in⁴ |
| Moment of inertia (Iy) | 52,093.62 cm⁴ | 1251.55 in⁴ |
| Elastic section modulus (Sx) | 6,071.08 cm³ | 370.482 in³ |
| Elastic section modulus (Sy) | 2,083.74 cm³ | 127.158 in³ |
| Plastic section modulus (Zx) | 6,646.25 cm³ | 405.581 in³ |
| Plastic section modulus (Zy) | 3,147.05 cm³ | 192.046 in³ |
| Radius of gyration (rx) | 22.02 cm | 8.670 in |
| Radius of gyration (ry) | 12.9 cm | 5.079 in |
Beam Calculator— I 500x500x14x25
Results — I 500x500x14x25
15.0 kN·m
15.0 kN
0.06 mm
L/107930
