Tecnometal, welded sections (Spain) · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 600x350x15x25 Tecnometal in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 600x350x15x25 steel profile weighs 202.1 kg/m (135.84 lb/ft), has a depth of 600 mm (23.62 in), flange width 350 mm (13.78 in). Cross-sectional area: 25,750 mm². Moment of inertia Ix = 165,536.458 cm⁴, Iy = 17,880.052 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 600 mm | 23.62 in |
| Width (b) | 350 mm | 13.78 in |
| Web thickness (tw) | 15 mm | 0.59 in |
| Flange thickness (tf) | 25 mm | 0.98 in |
| Weight | 202.1 kg/m | 135.84 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 25,750 mm² | 39.913 in² |
| Moment of inertia (Ix) | 165,536.46 cm⁴ | 3977.01 in⁴ |
| Moment of inertia (Iy) | 17,880.05 cm⁴ | 429.57 in⁴ |
| Elastic section modulus (Sx) | 5,517.88 cm³ | 336.723 in³ |
| Elastic section modulus (Sy) | 1,021.72 cm³ | 62.349 in³ |
| Plastic section modulus (Zx) | 6,165.63 cm³ | 376.251 in³ |
| Plastic section modulus (Zy) | 1,562.19 cm³ | 95.331 in³ |
| Radius of gyration (rx) | 25.35 cm | 9.982 in |
| Radius of gyration (ry) | 8.33 cm | 3.281 in |
15.0 kN·m
15.0 kN
0.05 mm
L/117715