I 530x330x14x25 Tecnometal · Weight & Dimensions
Tecnometal, welded sections (Spain) · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 530x330x14x25 Tecnometal in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 530x330x14x25 steel profile weighs 182.3 kg/m (122.49 lb/ft), has a depth of 530 mm (20.87 in), flange width 330 mm (12.99 in). Cross-sectional area: 23,220 mm². Moment of inertia Ix = 118,186.15 cm⁴, Iy = 14,984.726 cm⁴.
Dimensions
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 530 mm | 20.87 in |
| Width (b) | 330 mm | 12.99 in |
| Web thickness (tw) | 14 mm | 0.55 in |
| Flange thickness (tf) | 25 mm | 0.98 in |
| Weight | 182.3 kg/m | 122.49 lb/ft |
Section Properties
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 23,220 mm² | 35.991 in² |
| Moment of inertia (Ix) | 118,186.15 cm⁴ | 2839.42 in⁴ |
| Moment of inertia (Iy) | 14,984.73 cm⁴ | 360.01 in⁴ |
| Elastic section modulus (Sx) | 4,459.85 cm³ | 272.158 in³ |
| Elastic section modulus (Sy) | 908.17 cm³ | 55.420 in³ |
| Plastic section modulus (Zx) | 4,972.65 cm³ | 303.451 in³ |
| Plastic section modulus (Zy) | 1,384.77 cm³ | 84.504 in³ |
| Radius of gyration (rx) | 22.56 cm | 8.882 in |
| Radius of gyration (ry) | 8.03 cm | 3.163 in |
Beam Calculator— I 530x330x14x25
Results — I 530x330x14x25
15.0 kN·m
15.0 kN
0.07 mm
L/84043
