L 75x75x7 Tecnometal · Weight & Dimensions

Tecnometal, hot-rolled sections · Angle Section

Angle sections (L shapes) are used for bracing, connections, lintels, and built-up members. Available in equal and unequal leg configurations.

Also known as: RSA 75x75x7 (UK)

The L 75x75x7 steel profile weighs 7.9 kg/m (5.34 lb/ft), has a depth of 75 mm (2.95 in), flange width 75 mm (2.95 in). Cross-sectional area: 1,018.383 mm². Moment of inertia Ix = 53.677 cm⁴, Iy = 53.677 cm⁴.

Cross-section (not to scale)

Dimensions

Property	Metric	Imperial
Depth (h)	75 mm	2.95 in
Width (b)	75 mm	2.95 in
Thickness (t)	7 mm	0.28 in
Fillet radius (r)	9 mm	0.35 in
Weight	7.9 kg/m	5.34 lb/ft

Section Properties

Property	Metric	Imperial
Area (A)	1,018.38 mm²	1.578 in²
Moment of inertia (Ix)	53.68 cm⁴	1.29 in⁴
Moment of inertia (Iy)	53.68 cm⁴	1.29 in⁴
Elastic section modulus (Sx)	9.93 cm³	0.606 in³
Elastic section modulus (Sy)	9.93 cm³	0.606 in³
Plastic section modulus (Zx)	14.9 cm³	0.909 in³
Plastic section modulus (Zy)	14.9 cm³	0.909 in³
Radius of gyration (rx)	2.3 cm	0.904 in
Radius of gyration (ry)	2.3 cm	0.904 in