L 65x65x7 Tecnometal · Weight & Dimensions

Tecnometal, hot-rolled sections · Angle Section

Angle sections (L shapes) are used for bracing, connections, lintels, and built-up members. Available in equal and unequal leg configurations.

Also known as: RSA 65x65x7 (UK)

The L 65x65x7 steel profile weighs 6.8 kg/m (4.59 lb/ft), has a depth of 65 mm (2.56 in), flange width 65 mm (2.56 in). Cross-sectional area: 878.383 mm². Moment of inertia Ix = 34.241 cm⁴, Iy = 34.241 cm⁴.

Cross-section (not to scale)

Dimensions

Property	Metric	Imperial
Depth (h)	65 mm	2.56 in
Width (b)	65 mm	2.56 in
Thickness (t)	7 mm	0.28 in
Fillet radius (r)	9 mm	0.35 in
Weight	6.8 kg/m	4.59 lb/ft

Section Properties

Property	Metric	Imperial
Area (A)	878.38 mm²	1.361 in²
Moment of inertia (Ix)	34.24 cm⁴	0.82 in⁴
Moment of inertia (Iy)	34.24 cm⁴	0.82 in⁴
Elastic section modulus (Sx)	7.36 cm³	0.449 in³
Elastic section modulus (Sy)	7.36 cm³	0.449 in³
Plastic section modulus (Zx)	11.03 cm³	0.673 in³
Plastic section modulus (Zy)	11.03 cm³	0.673 in³
Radius of gyration (rx)	1.97 cm	0.777 in
Radius of gyration (ry)	1.97 cm	0.777 in