Tecnometal, welded sections (Brazil) · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the VS 275x40 Tecnometal in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The VS 275x40 steel profile weighs 39.8 kg/m (26.77 lb/ft), has a depth of 275 mm (10.83 in), flange width 140 mm (5.51 in). Cross-sectional area: 5,075 mm². Moment of inertia Ix = 6,854.167 cm⁴, Iy = 572.188 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 275 mm | 10.83 in |
| Width (b) | 140 mm | 5.51 in |
| Web thickness (tw) | 6.3 mm | 0.25 in |
| Flange thickness (tf) | 12.5 mm | 0.49 in |
| Weight | 39.8 kg/m | 26.77 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 5,075 mm² | 7.866 in² |
| Moment of inertia (Ix) | 6,854.17 cm⁴ | 164.67 in⁴ |
| Moment of inertia (Iy) | 572.19 cm⁴ | 13.75 in⁴ |
| Elastic section modulus (Sx) | 498.48 cm³ | 30.420 in³ |
| Elastic section modulus (Sy) | 81.74 cm³ | 4.988 in³ |
| Plastic section modulus (Zx) | 557.81 cm³ | 34.040 in³ |
| Plastic section modulus (Zy) | 124.98 cm³ | 7.627 in³ |
| Radius of gyration (rx) | 11.62 cm | 4.575 in |
| Radius of gyration (ry) | 3.36 cm | 1.322 in |
15.0 kN·m
15.0 kN
1.23 mm
L/4874