Tecnometal, welded sections (Brazil) · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 300x140x12.5x12.5 Tecnometal in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 300x140x12.5x12.5 steel profile weighs 54.5 kg/m (36.60 lb/ft), has a depth of 300 mm (11.81 in), flange width 140 mm (5.51 in). Cross-sectional area: 6,937.5 mm². Moment of inertia Ix = 9,403.32 cm⁴, Iy = 576.143 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 300 mm | 11.81 in |
| Width (b) | 140 mm | 5.51 in |
| Web thickness (tw) | 12.5 mm | 0.49 in |
| Flange thickness (tf) | 12.5 mm | 0.49 in |
| Weight | 54.5 kg/m | 36.60 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 6,937.5 mm² | 10.753 in² |
| Moment of inertia (Ix) | 9,403.32 cm⁴ | 225.91 in⁴ |
| Moment of inertia (Iy) | 576.14 cm⁴ | 13.84 in⁴ |
| Elastic section modulus (Sx) | 626.89 cm³ | 38.255 in³ |
| Elastic section modulus (Sy) | 82.31 cm³ | 5.023 in³ |
| Plastic section modulus (Zx) | 739.45 cm³ | 45.124 in³ |
| Plastic section modulus (Zy) | 133.24 cm³ | 8.131 in³ |
| Radius of gyration (rx) | 11.64 cm | 4.584 in |
| Radius of gyration (ry) | 2.88 cm | 1.135 in |
15.0 kN·m
15.0 kN
0.90 mm
L/6687