Tecnometal, welded sections (Brazil) · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the VEE 150x18 Tecnometal in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The VEE 150x18 steel profile weighs 17.6 kg/m (11.80 lb/ft), has a depth of 150 mm (5.91 in), flange width 100 mm (3.94 in). Cross-sectional area: 2,236.5 mm². Moment of inertia Ix = 902.655 cm⁴, Iy = 133.453 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 150 mm | 5.91 in |
| Width (b) | 100 mm | 3.94 in |
| Web thickness (tw) | 4.8 mm | 0.19 in |
| Flange thickness (tf) | 8 mm | 0.31 in |
| Weight | 17.6 kg/m | 11.80 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 2,236.5 mm² | 3.467 in² |
| Moment of inertia (Ix) | 902.65 cm⁴ | 21.69 in⁴ |
| Moment of inertia (Iy) | 133.45 cm⁴ | 3.21 in⁴ |
| Elastic section modulus (Sx) | 120.35 cm³ | 7.344 in³ |
| Elastic section modulus (Sy) | 26.69 cm³ | 1.629 in³ |
| Plastic section modulus (Zx) | 134.92 cm³ | 8.234 in³ |
| Plastic section modulus (Zy) | 40.76 cm³ | 2.487 in³ |
| Radius of gyration (rx) | 6.35 cm | 2.501 in |
| Radius of gyration (ry) | 2.44 cm | 0.962 in |
15.0 kN·m
15.0 kN
9.35 mm
L/642