Tecnometal, welded sections (Brazil) · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the VEE 100x11 Tecnometal in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The VEE 100x11 steel profile weighs 10.8 kg/m (7.28 lb/ft), has a depth of 100 mm (3.94 in), flange width 100 mm (3.94 in). Cross-sectional area: 1,379.875 mm². Moment of inertia Ix = 244.992 cm⁴, Iy = 79.247 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 100 mm | 3.94 in |
| Width (b) | 100 mm | 3.94 in |
| Web thickness (tw) | 4.8 mm | 0.19 in |
| Flange thickness (tf) | 4.8 mm | 0.19 in |
| Weight | 10.8 kg/m | 7.28 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 1,379.88 mm² | 2.139 in² |
| Moment of inertia (Ix) | 244.99 cm⁴ | 5.89 in⁴ |
| Moment of inertia (Iy) | 79.25 cm⁴ | 1.90 in⁴ |
| Elastic section modulus (Sx) | 49 cm³ | 2.990 in³ |
| Elastic section modulus (Sy) | 15.85 cm³ | 0.967 in³ |
| Plastic section modulus (Zx) | 54.97 cm³ | 3.354 in³ |
| Plastic section modulus (Zy) | 24.26 cm³ | 1.480 in³ |
| Radius of gyration (rx) | 4.21 cm | 1.659 in |
| Radius of gyration (ry) | 2.4 cm | 0.943 in |
15.0 kN·m
15.0 kN
34.44 mm
L/174