IMCA, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 782x180x12.7x15.9 IMCA in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 782x180x12.7x15.9 steel profile weighs 119.7 kg/m (80.45 lb/ft), has a depth of 782 mm (30.79 in), flange width 180 mm (7.09 in). Cross-sectional area: 15,251.54 mm². Moment of inertia Ix = 128,682.933 cm⁴, Iy = 1,558.286 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 782 mm | 30.79 in |
| Width (b) | 180 mm | 7.09 in |
| Web thickness (tw) | 12.7 mm | 0.50 in |
| Flange thickness (tf) | 15.9 mm | 0.63 in |
| Weight | 119.7 kg/m | 80.45 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 15,251.54 mm² | 23.640 in² |
| Moment of inertia (Ix) | 128,682.93 cm⁴ | 3091.61 in⁴ |
| Moment of inertia (Iy) | 1,558.29 cm⁴ | 37.44 in⁴ |
| Elastic section modulus (Sx) | 3,291.12 cm³ | 200.838 in³ |
| Elastic section modulus (Sy) | 173.14 cm³ | 10.566 in³ |
| Plastic section modulus (Zx) | 3,979.47 cm³ | 242.843 in³ |
| Plastic section modulus (Zy) | 287.83 cm³ | 17.565 in³ |
| Radius of gyration (rx) | 29.05 cm | 11.436 in |
| Radius of gyration (ry) | 3.2 cm | 1.258 in |
15.0 kN·m
15.0 kN
0.07 mm
L/91508