IMCA, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 775x180x12.7x12.7 IMCA in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 775x180x12.7x12.7 steel profile weighs 110.7 kg/m (74.38 lb/ft), has a depth of 775 mm (30.51 in), flange width 180 mm (7.09 in). Cross-sectional area: 14,091.92 mm². Moment of inertia Ix = 111,003.061 cm⁴, Iy = 1,247.236 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 775 mm | 30.51 in |
| Width (b) | 180 mm | 7.09 in |
| Web thickness (tw) | 12.7 mm | 0.50 in |
| Flange thickness (tf) | 12.7 mm | 0.50 in |
| Weight | 110.7 kg/m | 74.38 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 14,091.92 mm² | 21.842 in² |
| Moment of inertia (Ix) | 111,003.06 cm⁴ | 2666.85 in⁴ |
| Moment of inertia (Iy) | 1,247.24 cm⁴ | 29.96 in⁴ |
| Elastic section modulus (Sx) | 2,864.6 cm³ | 174.809 in³ |
| Elastic section modulus (Sy) | 138.58 cm³ | 8.457 in³ |
| Plastic section modulus (Zx) | 3,526.65 cm³ | 215.210 in³ |
| Plastic section modulus (Zy) | 235.97 cm³ | 14.400 in³ |
| Radius of gyration (rx) | 28.07 cm | 11.050 in |
| Radius of gyration (ry) | 2.98 cm | 1.171 in |
15.0 kN·m
15.0 kN
0.08 mm
L/78936