IMCA, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 1876x600x12.7x38.1 IMCA in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 1876x600x12.7x38.1 steel profile weighs 538.4 kg/m (361.77 lb/ft), has a depth of 1876 mm (73.86 in), flange width 600 mm (23.62 in). Cross-sectional area: 68,577.46 mm². Moment of inertia Ix = 4,478,480.083 cm⁴, Iy = 137,190.722 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 1876 mm | 73.86 in |
| Width (b) | 600 mm | 23.62 in |
| Web thickness (tw) | 12.7 mm | 0.50 in |
| Flange thickness (tf) | 38.1 mm | 1.50 in |
| Weight | 538.4 kg/m | 361.77 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 68,577.46 mm² | 106.295 in² |
| Moment of inertia (Ix) | 4,478,480.08 cm⁴ | 107595.48 in⁴ |
| Moment of inertia (Iy) | 137,190.72 cm⁴ | 3296.01 in⁴ |
| Elastic section modulus (Sx) | 47,744.99 cm³ | 2913.590 in³ |
| Elastic section modulus (Sy) | 4,573.02 cm³ | 279.064 in³ |
| Plastic section modulus (Zx) | 52,299.11 cm³ | 3191.501 in³ |
| Plastic section modulus (Zy) | 6,930.57 cm³ | 422.931 in³ |
| Radius of gyration (rx) | 80.81 cm | 31.816 in |
| Radius of gyration (ry) | 14.14 cm | 5.568 in |
15.0 kN·m
15.0 kN
0.00 mm
L/3184697