IMCA, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 1876x450x12.7x38.1 IMCA in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 1876x450x12.7x38.1 steel profile weighs 448.6 kg/m (301.48 lb/ft), has a depth of 1876 mm (73.86 in), flange width 450 mm (17.72 in). Cross-sectional area: 57,147.46 mm². Moment of inertia Ix = 3,513,113.633 cm⁴, Iy = 57,895.097 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 1876 mm | 73.86 in |
| Width (b) | 450 mm | 17.72 in |
| Web thickness (tw) | 12.7 mm | 0.50 in |
| Flange thickness (tf) | 38.1 mm | 1.50 in |
| Weight | 448.6 kg/m | 301.48 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 57,147.46 mm² | 88.579 in² |
| Moment of inertia (Ix) | 3,513,113.63 cm⁴ | 84402.56 in⁴ |
| Moment of inertia (Iy) | 57,895.1 cm⁴ | 1390.93 in⁴ |
| Elastic section modulus (Sx) | 37,453.24 cm³ | 2285.546 in³ |
| Elastic section modulus (Sy) | 2,573.12 cm³ | 157.022 in³ |
| Plastic section modulus (Zx) | 41,795.51 cm³ | 2550.529 in³ |
| Plastic section modulus (Zy) | 3,930.2 cm³ | 239.836 in³ |
| Radius of gyration (rx) | 78.41 cm | 30.868 in |
| Radius of gyration (ry) | 10.07 cm | 3.963 in |
15.0 kN·m
15.0 kN
0.00 mm
L/2498214