IMCA, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 1564x450x9.5x31.8 IMCA in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 1564x450x9.5x31.8 steel profile weighs 336.5 kg/m (226.15 lb/ft), has a depth of 1564 mm (61.57 in), flange width 450 mm (17.72 in). Cross-sectional area: 42,873.8 mm². Moment of inertia Ix = 1,947,376.647 cm⁴, Iy = 48,306.97 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 1564 mm | 61.57 in |
| Width (b) | 450 mm | 17.72 in |
| Web thickness (tw) | 9.5 mm | 0.37 in |
| Flange thickness (tf) | 31.8 mm | 1.25 in |
| Weight | 336.5 kg/m | 226.15 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 42,873.8 mm² | 66.454 in² |
| Moment of inertia (Ix) | 1,947,376.65 cm⁴ | 46785.72 in⁴ |
| Moment of inertia (Iy) | 48,306.97 cm⁴ | 1160.57 in⁴ |
| Elastic section modulus (Sx) | 24,902.51 cm³ | 1519.651 in³ |
| Elastic section modulus (Sy) | 2,146.98 cm³ | 131.017 in³ |
| Plastic section modulus (Zx) | 27,272.38 cm³ | 1664.270 in³ |
| Plastic section modulus (Zy) | 3,253.6 cm³ | 198.548 in³ |
| Radius of gyration (rx) | 67.4 cm | 26.533 in |
| Radius of gyration (ry) | 10.61 cm | 4.179 in |
15.0 kN·m
15.0 kN
0.00 mm
L/1384801