IMCA, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 1551x450x9.5x25.4 IMCA in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 1551x450x9.5x25.4 steel profile weighs 291.3 kg/m (195.76 lb/ft), has a depth of 1551 mm (61.06 in), flange width 450 mm (17.72 in). Cross-sectional area: 37,111.9 mm². Moment of inertia Ix = 1,597,558.03 cm⁴, Iy = 38,586.969 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 1551 mm | 61.06 in |
| Width (b) | 450 mm | 17.72 in |
| Web thickness (tw) | 9.5 mm | 0.37 in |
| Flange thickness (tf) | 25.4 mm | 1.00 in |
| Weight | 291.3 kg/m | 195.76 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 37,111.9 mm² | 57.523 in² |
| Moment of inertia (Ix) | 1,597,558.03 cm⁴ | 38381.33 in⁴ |
| Moment of inertia (Iy) | 38,586.97 cm⁴ | 927.05 in⁴ |
| Elastic section modulus (Sx) | 20,600.36 cm³ | 1257.116 in³ |
| Elastic section modulus (Sy) | 1,714.98 cm³ | 104.655 in³ |
| Plastic section modulus (Zx) | 22,782.78 cm³ | 1390.297 in³ |
| Plastic section modulus (Zy) | 2,605.6 cm³ | 159.004 in³ |
| Radius of gyration (rx) | 65.61 cm | 25.831 in |
| Radius of gyration (ry) | 10.2 cm | 4.014 in |
15.0 kN·m
15.0 kN
0.01 mm
L/1136041