IAS, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 753x266x12.5x20 IAS in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 753x266x12.5x20 steel profile weighs 153.5 kg/m (103.15 lb/ft), has a depth of 753 mm (29.65 in), flange width 266 mm (10.47 in). Cross-sectional area: 19,552.5 mm². Moment of inertia Ix = 180,711.33 cm⁴, Iy = 6,285.303 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 753 mm | 29.65 in |
| Width (b) | 266 mm | 10.47 in |
| Web thickness (tw) | 12.5 mm | 0.49 in |
| Flange thickness (tf) | 20 mm | 0.79 in |
| Weight | 153.5 kg/m | 103.15 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 19,552.5 mm² | 30.306 in² |
| Moment of inertia (Ix) | 180,711.33 cm⁴ | 4341.59 in⁴ |
| Moment of inertia (Iy) | 6,285.3 cm⁴ | 151.00 in⁴ |
| Elastic section modulus (Sx) | 4,799.77 cm³ | 292.901 in³ |
| Elastic section modulus (Sy) | 472.58 cm³ | 28.839 in³ |
| Plastic section modulus (Zx) | 5,488.21 cm³ | 334.913 in³ |
| Plastic section modulus (Zy) | 735.41 cm³ | 44.878 in³ |
| Radius of gyration (rx) | 30.4 cm | 11.969 in |
| Radius of gyration (ry) | 5.67 cm | 2.232 in |
15.0 kN·m
15.0 kN
0.05 mm
L/128506