IAS, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 696x355x15.5x25 IAS in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 696x355x15.5x25 steel profile weighs 217.9 kg/m (146.46 lb/ft), has a depth of 696 mm (27.40 in), flange width 355 mm (13.98 in). Cross-sectional area: 27,763 mm². Moment of inertia Ix = 234,708.434 cm⁴, Iy = 18,661.245 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 696 mm | 27.40 in |
| Width (b) | 355 mm | 13.98 in |
| Web thickness (tw) | 15.5 mm | 0.61 in |
| Flange thickness (tf) | 25 mm | 0.98 in |
| Weight | 217.9 kg/m | 146.46 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 27,763 mm² | 43.033 in² |
| Moment of inertia (Ix) | 234,708.43 cm⁴ | 5638.87 in⁴ |
| Moment of inertia (Iy) | 18,661.24 cm⁴ | 448.34 in⁴ |
| Elastic section modulus (Sx) | 6,744.5 cm³ | 411.576 in³ |
| Elastic section modulus (Sy) | 1,051.34 cm³ | 64.157 in³ |
| Plastic section modulus (Zx) | 7,572.22 cm³ | 462.087 in³ |
| Plastic section modulus (Zy) | 1,614.11 cm³ | 98.500 in³ |
| Radius of gyration (rx) | 29.08 cm | 11.447 in |
| Radius of gyration (ry) | 8.2 cm | 3.228 in |
15.0 kN·m
15.0 kN
0.04 mm
L/166904