Cintac, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 600x300x8x32 Cintac in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 600x300x8x32 steel profile weighs 184.4 kg/m (123.92 lb/ft), has a depth of 600 mm (23.62 in), flange width 300 mm (11.81 in). Cross-sectional area: 23,488 mm². Moment of inertia Ix = 165,289.404 cm⁴, Iy = 14,402.287 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 600 mm | 23.62 in |
| Width (b) | 300 mm | 11.81 in |
| Web thickness (tw) | 8 mm | 0.31 in |
| Flange thickness (tf) | 32 mm | 1.26 in |
| Weight | 184.4 kg/m | 123.92 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 23,488 mm² | 36.406 in² |
| Moment of inertia (Ix) | 165,289.4 cm⁴ | 3971.08 in⁴ |
| Moment of inertia (Iy) | 14,402.29 cm⁴ | 346.01 in⁴ |
| Elastic section modulus (Sx) | 5,509.65 cm³ | 336.221 in³ |
| Elastic section modulus (Sy) | 960.15 cm³ | 58.592 in³ |
| Plastic section modulus (Zx) | 6,027.39 cm³ | 367.816 in³ |
| Plastic section modulus (Zy) | 1,448.58 cm³ | 88.398 in³ |
| Radius of gyration (rx) | 26.53 cm | 10.444 in |
| Radius of gyration (ry) | 7.83 cm | 3.083 in |
15.0 kN·m
15.0 kN
0.05 mm
L/117539