Cintac, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 600x300x8x28 Cintac in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 600x300x8x28 steel profile weighs 166.0 kg/m (111.57 lb/ft), has a depth of 600 mm (23.62 in), flange width 300 mm (11.81 in). Cross-sectional area: 21,152 mm². Moment of inertia Ix = 148,259.652 cm⁴, Iy = 12,602.321 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 600 mm | 23.62 in |
| Width (b) | 300 mm | 11.81 in |
| Web thickness (tw) | 8 mm | 0.31 in |
| Flange thickness (tf) | 28 mm | 1.10 in |
| Weight | 166.0 kg/m | 111.57 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 21,152 mm² | 32.786 in² |
| Moment of inertia (Ix) | 148,259.65 cm⁴ | 3561.94 in⁴ |
| Moment of inertia (Iy) | 12,602.32 cm⁴ | 302.77 in⁴ |
| Elastic section modulus (Sx) | 4,941.99 cm³ | 301.580 in³ |
| Elastic section modulus (Sy) | 840.15 cm³ | 51.270 in³ |
| Plastic section modulus (Zx) | 5,396.67 cm³ | 329.327 in³ |
| Plastic section modulus (Zy) | 1,268.7 cm³ | 77.421 in³ |
| Radius of gyration (rx) | 26.47 cm | 10.423 in |
| Radius of gyration (ry) | 7.72 cm | 3.039 in |
15.0 kN·m
15.0 kN
0.06 mm
L/105429