Cintac, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 450x250x8x22 Cintac in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 450x250x8x22 steel profile weighs 111.9 kg/m (75.17 lb/ft), has a depth of 450 mm (17.72 in), flange width 250 mm (9.84 in). Cross-sectional area: 14,248 mm². Moment of inertia Ix = 54,881.528 cm⁴, Iy = 5,730.899 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 450 mm | 17.72 in |
| Width (b) | 250 mm | 9.84 in |
| Web thickness (tw) | 8 mm | 0.31 in |
| Flange thickness (tf) | 22 mm | 0.87 in |
| Weight | 111.9 kg/m | 75.17 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 14,248 mm² | 22.084 in² |
| Moment of inertia (Ix) | 54,881.53 cm⁴ | 1318.53 in⁴ |
| Moment of inertia (Iy) | 5,730.9 cm⁴ | 137.68 in⁴ |
| Elastic section modulus (Sx) | 2,439.18 cm³ | 148.848 in³ |
| Elastic section modulus (Sy) | 458.47 cm³ | 27.978 in³ |
| Plastic section modulus (Zx) | 2,683.67 cm³ | 163.768 in³ |
| Plastic section modulus (Zy) | 694 cm³ | 42.350 in³ |
| Radius of gyration (rx) | 19.63 cm | 7.727 in |
| Radius of gyration (ry) | 6.34 cm | 2.497 in |
15.0 kN·m
15.0 kN
0.15 mm
L/39027