Cintac, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 450x250x8x20 Cintac in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 450x250x8x20 steel profile weighs 104.3 kg/m (70.06 lb/ft), has a depth of 450 mm (17.72 in), flange width 250 mm (9.84 in). Cross-sectional area: 13,280 mm². Moment of inertia Ix = 50,853.067 cm⁴, Iy = 5,210.083 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 450 mm | 17.72 in |
| Width (b) | 250 mm | 9.84 in |
| Web thickness (tw) | 8 mm | 0.31 in |
| Flange thickness (tf) | 20 mm | 0.79 in |
| Weight | 104.3 kg/m | 70.06 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 13,280 mm² | 20.584 in² |
| Moment of inertia (Ix) | 50,853.07 cm⁴ | 1221.74 in⁴ |
| Moment of inertia (Iy) | 5,210.08 cm⁴ | 125.17 in⁴ |
| Elastic section modulus (Sx) | 2,260.14 cm³ | 137.923 in³ |
| Elastic section modulus (Sy) | 416.81 cm³ | 25.435 in³ |
| Plastic section modulus (Zx) | 2,486.2 cm³ | 151.718 in³ |
| Plastic section modulus (Zy) | 631.56 cm³ | 38.540 in³ |
| Radius of gyration (rx) | 19.57 cm | 7.704 in |
| Radius of gyration (ry) | 6.26 cm | 2.466 in |
15.0 kN·m
15.0 kN
0.17 mm
L/36162