Cintac, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 250x250x6x12 Cintac in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 250x250x6x12 steel profile weighs 57.8 kg/m (38.83 lb/ft), has a depth of 250 mm (9.84 in), flange width 250 mm (9.84 in). Cross-sectional area: 7,356 mm². Moment of inertia Ix = 9,080.959 cm⁴, Iy = 3,125.407 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 250 mm | 9.84 in |
| Width (b) | 250 mm | 9.84 in |
| Web thickness (tw) | 6 mm | 0.24 in |
| Flange thickness (tf) | 12 mm | 0.47 in |
| Weight | 57.8 kg/m | 38.83 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 7,356 mm² | 11.402 in² |
| Moment of inertia (Ix) | 9,080.96 cm⁴ | 218.17 in⁴ |
| Moment of inertia (Iy) | 3,125.41 cm⁴ | 75.09 in⁴ |
| Elastic section modulus (Sx) | 726.48 cm³ | 44.333 in³ |
| Elastic section modulus (Sy) | 250.03 cm³ | 15.258 in³ |
| Plastic section modulus (Zx) | 790.61 cm³ | 48.246 in³ |
| Plastic section modulus (Zy) | 377.03 cm³ | 23.008 in³ |
| Radius of gyration (rx) | 11.11 cm | 4.374 in |
| Radius of gyration (ry) | 6.52 cm | 2.566 in |
15.0 kN·m
15.0 kN
0.93 mm
L/6458