Cintac, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 250x250x6x10 Cintac in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 250x250x6x10 steel profile weighs 50.1 kg/m (33.65 lb/ft), has a depth of 250 mm (9.84 in), flange width 250 mm (9.84 in). Cross-sectional area: 6,380 mm². Moment of inertia Ix = 7,812.517 cm⁴, Iy = 2,604.581 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 250 mm | 9.84 in |
| Width (b) | 250 mm | 9.84 in |
| Web thickness (tw) | 6 mm | 0.24 in |
| Flange thickness (tf) | 10 mm | 0.39 in |
| Weight | 50.1 kg/m | 33.65 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 6,380 mm² | 9.889 in² |
| Moment of inertia (Ix) | 7,812.52 cm⁴ | 187.70 in⁴ |
| Moment of inertia (Iy) | 2,604.58 cm⁴ | 62.58 in⁴ |
| Elastic section modulus (Sx) | 625 cm³ | 38.140 in³ |
| Elastic section modulus (Sy) | 208.37 cm³ | 12.715 in³ |
| Plastic section modulus (Zx) | 679.35 cm³ | 41.457 in³ |
| Plastic section modulus (Zy) | 314.57 cm³ | 19.196 in³ |
| Radius of gyration (rx) | 11.07 cm | 4.357 in |
| Radius of gyration (ry) | 6.39 cm | 2.515 in |
15.0 kN·m
15.0 kN
1.08 mm
L/5556