Cintac, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 200x200x6x8 Cintac in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 200x200x6x8 steel profile weighs 33.8 kg/m (22.69 lb/ft), has a depth of 200 mm (7.87 in), flange width 200 mm (7.87 in). Cross-sectional area: 4,304 mm². Moment of inertia Ix = 3,262.302 cm⁴, Iy = 1,066.998 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 200 mm | 7.87 in |
| Width (b) | 200 mm | 7.87 in |
| Web thickness (tw) | 6 mm | 0.24 in |
| Flange thickness (tf) | 8 mm | 0.31 in |
| Weight | 33.8 kg/m | 22.69 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 4,304 mm² | 6.671 in² |
| Moment of inertia (Ix) | 3,262.3 cm⁴ | 78.38 in⁴ |
| Moment of inertia (Iy) | 1,067 cm⁴ | 25.63 in⁴ |
| Elastic section modulus (Sx) | 326.23 cm³ | 19.908 in³ |
| Elastic section modulus (Sy) | 106.7 cm³ | 6.511 in³ |
| Plastic section modulus (Zx) | 357.98 cm³ | 21.846 in³ |
| Plastic section modulus (Zy) | 161.66 cm³ | 9.865 in³ |
| Radius of gyration (rx) | 8.71 cm | 3.428 in |
| Radius of gyration (ry) | 4.98 cm | 1.960 in |
15.0 kN·m
15.0 kN
2.59 mm
L/2320