Cintac, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 200x200x4x10 Cintac in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 200x200x4x10 steel profile weighs 37.0 kg/m (24.90 lb/ft), has a depth of 200 mm (7.87 in), flange width 200 mm (7.87 in). Cross-sectional area: 4,720 mm². Moment of inertia Ix = 3,807.733 cm⁴, Iy = 1,333.429 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 200 mm | 7.87 in |
| Width (b) | 200 mm | 7.87 in |
| Web thickness (tw) | 4 mm | 0.16 in |
| Flange thickness (tf) | 10 mm | 0.39 in |
| Weight | 37.0 kg/m | 24.90 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 4,720 mm² | 7.316 in² |
| Moment of inertia (Ix) | 3,807.73 cm⁴ | 91.48 in⁴ |
| Moment of inertia (Iy) | 1,333.43 cm⁴ | 32.04 in⁴ |
| Elastic section modulus (Sx) | 380.77 cm³ | 23.236 in³ |
| Elastic section modulus (Sy) | 133.34 cm³ | 8.137 in³ |
| Plastic section modulus (Zx) | 412.4 cm³ | 25.166 in³ |
| Plastic section modulus (Zy) | 200.72 cm³ | 12.249 in³ |
| Radius of gyration (rx) | 8.98 cm | 3.536 in |
| Radius of gyration (ry) | 5.32 cm | 2.093 in |
15.0 kN·m
15.0 kN
2.22 mm
L/2708