Steel Section Catalog
W360x64
AISC — Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
The W360x64 steel profile weighs 64.0 kg/m (43.01 lb/ft), has a depth of 347 mm (13.66 in), flange width 203 mm (7.99 in). Cross-sectional area: 7,945 mm². Moment of inertia Ix = 17,351.17 cm⁴, Iy = 1,883.44 cm⁴.
Cross-section (not to scale)
Dimensions
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 347 mm | 13.66 in |
| Width (b) | 203 mm | 7.99 in |
| Web thickness (tw) | 7.7 mm | 0.30 in |
| Flange thickness (tf) | 13.5 mm | 0.53 in |
| Fillet radius (r) | 10.2 mm | 0.40 in |
| Weight | 64.0 kg/m | 43.01 lb/ft |
Section Properties
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 7,945 mm² | 12.315 in² |
| Moment of inertia (Ix) | 17,351.17 cm⁴ | 416.86 in⁴ |
| Moment of inertia (Iy) | 1,883.44 cm⁴ | 45.25 in⁴ |
| Elastic section modulus (Sx) | 1,000.07 cm³ | 61.028 in³ |
| Elastic section modulus (Sy) | 185.56 cm³ | 11.324 in³ |
| Plastic section modulus (Zx) | 1,111.08 cm³ | 67.803 in³ |
| Plastic section modulus (Zy) | 282.9 cm³ | 17.264 in³ |
| Radius of gyration (rx) | 14.78 cm | 5.819 in |
| Radius of gyration (ry) | 4.87 cm | 1.917 in |
Beam Calculator— W360x64
3D preview unavailable
Your device does not support WebGL. The 2D diagram below is still fully functional.
mfixed @ 0mfixed @ 6m→kN/m
Results — W360x64
Mmax
15.0 kN·m
Vmax
15.0 kN
δmax
0.49 mm
L/12339
R115.0 kN| 15.0 kN·mR215.0 kN| -15.0 kN·m
Standard:
