Steel Section Catalog
ISA 80x50x6
IS — Angle Section
Angle sections (L shapes) are used for bracing, connections, lintels, and built-up members. Available in equal and unequal leg configurations.
The ISA 80x50x6 steel profile weighs 5.5 kg/m (3.70 lb/ft), has a depth of 80 mm (3.15 in), flange width 50 mm (1.97 in). Cross-sectional area: 744 mm². Moment of inertia Ix = 49 cm⁴, Iy = 15.05 cm⁴.
Cross-section (not to scale)
Dimensions
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 80 mm | 3.15 in |
| Width (b) | 50 mm | 1.97 in |
| Thickness (t) | 6 mm | 0.24 in |
| Fillet radius (r) | 10 mm | 0.39 in |
| Weight | 5.5 kg/m | 3.70 lb/ft |
Section Properties
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 744 mm² | 1.153 in² |
| Moment of inertia (Ix) | 49 cm⁴ | 1.18 in⁴ |
| Moment of inertia (Iy) | 15.05 cm⁴ | 0.36 in⁴ |
| Elastic section modulus (Sx) | 9.22 cm³ | 0.563 in³ |
| Elastic section modulus (Sy) | 3.95 cm³ | 0.241 in³ |
| Plastic section modulus (Zx) | 13.83 cm³ | 0.844 in³ |
| Plastic section modulus (Zy) | 5.92 cm³ | 0.361 in³ |
| Radius of gyration (rx) | 2.57 cm | 1.012 in |
| Radius of gyration (ry) | 1.42 cm | 0.559 in |
Beam Calculator— ISA 80x50x6
3D preview unavailable
Your device does not support WebGL. The 2D diagram below is still fully functional.
mfixed @ 0mfixed @ 6m→kN/m
Results — ISA 80x50x6
Mmax
15.0 kN·m
Vmax
15.0 kN
δmax
172.19 mm
L/35
R115.0 kN| 15.0 kN·mR215.0 kN| -15.0 kN·m
Standard:
