Steel Section Catalog
ISA 75x50x10
IS — Angle Section
Angle sections (L shapes) are used for bracing, connections, lintels, and built-up members. Available in equal and unequal leg configurations.
The ISA 75x50x10 steel profile weighs 9.4 kg/m (6.32 lb/ft), has a depth of 75 mm (2.95 in), flange width 50 mm (1.97 in). Cross-sectional area: 1,150 mm². Moment of inertia Ix = 63.04 cm⁴, Iy = 22.26 cm⁴.
Cross-section (not to scale)
Dimensions
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 75 mm | 2.95 in |
| Width (b) | 50 mm | 1.97 in |
| Thickness (t) | 10 mm | 0.39 in |
| Fillet radius (r) | 9 mm | 0.35 in |
| Weight | 9.4 kg/m | 6.32 lb/ft |
Section Properties
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 1,150 mm² | 1.782 in² |
| Moment of inertia (Ix) | 63.04 cm⁴ | 1.51 in⁴ |
| Moment of inertia (Iy) | 22.26 cm⁴ | 0.53 in⁴ |
| Elastic section modulus (Sx) | 12.92 cm³ | 0.788 in³ |
| Elastic section modulus (Sy) | 6.13 cm³ | 0.374 in³ |
| Plastic section modulus (Zx) | 19.38 cm³ | 1.183 in³ |
| Plastic section modulus (Zy) | 9.2 cm³ | 0.561 in³ |
| Radius of gyration (rx) | 2.34 cm | 0.921 in |
| Radius of gyration (ry) | 1.39 cm | 0.547 in |
Beam Calculator— ISA 75x50x10
3D preview unavailable
Your device does not support WebGL. The 2D diagram below is still fully functional.
mfixed @ 0mfixed @ 6m→kN/m
Results — ISA 75x50x10
Mmax
15.0 kN·m
Vmax
15.0 kN
δmax
133.84 mm
L/45
R115.0 kN| 15.0 kN·mR215.0 kN| -15.0 kN·m
Standard:
