L 75x53x5 Tecnometal · Weight & Dimensions

Tecnometal, cold-formed sections (Italy) · Angle Section

Angle sections (L shapes) are used for bracing, connections, lintels, and built-up members. Available in equal and unequal leg configurations.

Also known as: RSA 75x53x5 (UK)

The L 75x53x5 steel profile weighs 4.9 kg/m (3.27 lb/ft), has a depth of 75 mm (2.95 in), flange width 53 mm (2.09 in). Cross-sectional area: 598.905 mm². Moment of inertia Ix = 34.692 cm⁴, Iy = 14.733 cm⁴.

Cross-section (not to scale)

Dimensions

Property	Metric	Imperial
Depth (h)	75 mm	2.95 in
Width (b)	53 mm	2.09 in
Thickness (t)	5 mm	0.20 in
Fillet radius (r)	5 mm	0.20 in
Weight	4.9 kg/m	3.27 lb/ft

Section Properties

Property	Metric	Imperial
Area (A)	598.9 mm²	0.928 in²
Moment of inertia (Ix)	34.69 cm⁴	0.83 in⁴
Moment of inertia (Iy)	14.73 cm⁴	0.35 in⁴
Elastic section modulus (Sx)	6.86 cm³	0.419 in³
Elastic section modulus (Sy)	3.7 cm³	0.226 in³
Plastic section modulus (Zx)	10.3 cm³	0.628 in³
Plastic section modulus (Zy)	5.55 cm³	0.339 in³
Radius of gyration (rx)	2.41 cm	0.948 in
Radius of gyration (ry)	1.57 cm	0.617 in