Tecnometal, welded sections (Spain) · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 890x300x9x25 Tecnometal in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 890x300x9x25 steel profile weighs 177.1 kg/m (119.01 lb/ft), has a depth of 890 mm (35.04 in), flange width 300 mm (11.81 in). Cross-sectional area: 22,560 mm². Moment of inertia Ix = 325,115.3 cm⁴, Iy = 11,255.103 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 890 mm | 35.04 in |
| Width (b) | 300 mm | 11.81 in |
| Web thickness (tw) | 9 mm | 0.35 in |
| Flange thickness (tf) | 25 mm | 0.98 in |
| Weight | 177.1 kg/m | 119.01 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 22,560 mm² | 34.968 in² |
| Moment of inertia (Ix) | 325,115.3 cm⁴ | 7810.90 in⁴ |
| Moment of inertia (Iy) | 11,255.1 cm⁴ | 270.40 in⁴ |
| Elastic section modulus (Sx) | 7,305.96 cm³ | 445.839 in³ |
| Elastic section modulus (Sy) | 750.34 cm³ | 45.789 in³ |
| Plastic section modulus (Zx) | 8,075.1 cm³ | 492.775 in³ |
| Plastic section modulus (Zy) | 1,142.01 cm³ | 69.690 in³ |
| Radius of gyration (rx) | 37.96 cm | 14.946 in |
| Radius of gyration (ry) | 7.06 cm | 2.781 in |
15.0 kN·m
15.0 kN
0.03 mm
L/231193