I 700x300x17x32 Tecnometal · Weight & Dimensions
Tecnometal, welded sections (Spain) · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 700x300x17x32 Tecnometal in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 700x300x17x32 steel profile weighs 235.6 kg/m (158.32 lb/ft), has a depth of 700 mm (27.56 in), flange width 300 mm (11.81 in). Cross-sectional area: 30,012 mm². Moment of inertia Ix = 250,796.45 cm⁴, Iy = 14,426.039 cm⁴.
Dimensions
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 700 mm | 27.56 in |
| Width (b) | 300 mm | 11.81 in |
| Web thickness (tw) | 17 mm | 0.67 in |
| Flange thickness (tf) | 32 mm | 1.26 in |
| Weight | 235.6 kg/m | 158.32 lb/ft |
Section Properties
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 30,012 mm² | 46.519 in² |
| Moment of inertia (Ix) | 250,796.45 cm⁴ | 6025.38 in⁴ |
| Moment of inertia (Iy) | 14,426.04 cm⁴ | 346.59 in⁴ |
| Elastic section modulus (Sx) | 7,165.61 cm³ | 437.274 in³ |
| Elastic section modulus (Sy) | 961.74 cm³ | 58.689 in³ |
| Plastic section modulus (Zx) | 8,131.91 cm³ | 496.242 in³ |
| Plastic section modulus (Zy) | 1,485.95 cm³ | 90.679 in³ |
| Radius of gyration (rx) | 28.91 cm | 11.381 in |
| Radius of gyration (ry) | 6.93 cm | 2.730 in |
Beam Calculator— I 700x300x17x32
Results — I 700x300x17x32
15.0 kN·m
15.0 kN
0.03 mm
L/178344
