Tecnometal, welded sections (Spain) · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 640x300x7x22 Tecnometal in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 640x300x7x22 steel profile weighs 136.4 kg/m (91.64 lb/ft), has a depth of 640 mm (25.20 in), flange width 300 mm (11.81 in). Cross-sectional area: 17,372 mm². Moment of inertia Ix = 138,437.836 cm⁴, Iy = 9,901.704 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 640 mm | 25.20 in |
| Width (b) | 300 mm | 11.81 in |
| Web thickness (tw) | 7 mm | 0.28 in |
| Flange thickness (tf) | 22 mm | 0.87 in |
| Weight | 136.4 kg/m | 91.64 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 17,372 mm² | 26.927 in² |
| Moment of inertia (Ix) | 138,437.84 cm⁴ | 3325.97 in⁴ |
| Moment of inertia (Iy) | 9,901.7 cm⁴ | 237.89 in⁴ |
| Elastic section modulus (Sx) | 4,326.18 cm³ | 264.001 in³ |
| Elastic section modulus (Sy) | 660.11 cm³ | 40.283 in³ |
| Plastic section modulus (Zx) | 4,700.43 cm³ | 286.839 in³ |
| Plastic section modulus (Zy) | 997.3 cm³ | 60.859 in³ |
| Radius of gyration (rx) | 28.23 cm | 11.114 in |
| Radius of gyration (ry) | 7.55 cm | 2.972 in |
15.0 kN·m
15.0 kN
0.06 mm
L/98445