I 1000x300x19x36 Tecnometal · Weight & Dimensions
Tecnometal, welded sections (Spain) · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 1000x300x19x36 Tecnometal in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 1000x300x19x36 steel profile weighs 308.0 kg/m (206.96 lb/ft), has a depth of 1000 mm (39.37 in), flange width 300 mm (11.81 in). Cross-sectional area: 39,232 mm². Moment of inertia Ix = 628,589.756 cm⁴, Iy = 16,253.043 cm⁴.
Dimensions
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 1000 mm | 39.37 in |
| Width (b) | 300 mm | 11.81 in |
| Web thickness (tw) | 19 mm | 0.75 in |
| Flange thickness (tf) | 36 mm | 1.42 in |
| Weight | 308.0 kg/m | 206.96 lb/ft |
Section Properties
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 39,232 mm² | 60.810 in² |
| Moment of inertia (Ix) | 628,589.76 cm⁴ | 15101.87 in⁴ |
| Moment of inertia (Iy) | 16,253.04 cm⁴ | 390.48 in⁴ |
| Elastic section modulus (Sx) | 12,571.8 cm³ | 767.181 in³ |
| Elastic section modulus (Sy) | 1,083.54 cm³ | 66.122 in³ |
| Plastic section modulus (Zx) | 14,501.82 cm³ | 884.959 in³ |
| Plastic section modulus (Zy) | 1,703.75 cm³ | 103.970 in³ |
| Radius of gyration (rx) | 40.03 cm | 15.759 in |
| Radius of gyration (ry) | 6.44 cm | 2.534 in |
Beam Calculator— I 1000x300x19x36
Results — I 1000x300x19x36
15.0 kN·m
15.0 kN
0.01 mm
L/446997
