Tecnometal, hot-rolled sections · Cold-formed Channel
Cold-formed channels (U shapes) are similar to C shapes but without stiffening lips. Used for light structural framing, supports, and secondary members.
Put the U 100 x 10,5 Tecnometal in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The U 100 x 10,5 steel profile weighs 10.5 kg/m (7.06 lb/ft), has a depth of 100 mm (3.94 in), flange width 50 mm (1.97 in). Cross-sectional area: 1,349.42 mm². Moment of inertia Ix = 211.262 cm⁴, Iy = 32.916 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 100 mm | 3.94 in |
| Width (b) | 50 mm | 1.97 in |
| Web thickness (tw) | 5.5 mm | 0.22 in |
| Flange thickness (tf) | 8.5 mm | 0.33 in |
| Fillet radius (r) | 10 mm | 0.39 in |
| Weight | 10.5 kg/m | 7.06 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 1,349.42 mm² | 2.092 in² |
| Moment of inertia (Ix) | 211.26 cm⁴ | 5.08 in⁴ |
| Moment of inertia (Iy) | 32.92 cm⁴ | 0.79 in⁴ |
| Elastic section modulus (Sx) | 42.25 cm³ | 2.578 in³ |
| Elastic section modulus (Sy) | 9.95 cm³ | 0.607 in³ |
| Plastic section modulus (Zx) | 50.05 cm³ | 3.054 in³ |
| Plastic section modulus (Zy) | 17.87 cm³ | 1.090 in³ |
| Radius of gyration (rx) | 3.96 cm | 1.558 in |
| Radius of gyration (ry) | 1.56 cm | 0.615 in |
15.0 kN·m
15.0 kN
39.94 mm
L/150