L 35x35x4 Tecnometal · Weight & Dimensions

Tecnometal, hot-rolled sections · Angle Section

Angle sections (L shapes) are used for bracing, connections, lintels, and built-up members. Available in equal and unequal leg configurations.

Also known as: RSA 35x35x4 (UK)

The L 35x35x4 steel profile weighs 2.1 kg/m (1.41 lb/ft), has a depth of 35 mm (1.38 in), flange width 35 mm (1.38 in). Cross-sectional area: 269.365 mm². Moment of inertia Ix = 3.027 cm⁴, Iy = 3.027 cm⁴.

Cross-section (not to scale)

Dimensions

Property	Metric	Imperial
Depth (h)	35 mm	1.38 in
Width (b)	35 mm	1.38 in
Thickness (t)	4 mm	0.16 in
Fillet radius (r)	5 mm	0.20 in
Weight	2.1 kg/m	1.41 lb/ft

Section Properties

Property	Metric	Imperial
Area (A)	269.37 mm²	0.418 in²
Moment of inertia (Ix)	3.03 cm⁴	0.07 in⁴
Moment of inertia (Iy)	3.03 cm⁴	0.07 in⁴
Elastic section modulus (Sx)	1.21 cm³	0.074 in³
Elastic section modulus (Sy)	1.21 cm³	0.074 in³
Plastic section modulus (Zx)	1.82 cm³	0.111 in³
Plastic section modulus (Zy)	1.82 cm³	0.111 in³
Radius of gyration (rx)	1.06 cm	0.417 in
Radius of gyration (ry)	1.06 cm	0.417 in